SAF-T-LOK® Instant Bonders (Cyanoacrylate Adhesives) provide exceptional tensile shear strengths within seconds at room temperature. Materials such as metals, plastics, rubber and glass may be bonded with these single part adhesives. See Instant Bonder.
SAF-T-LOK® Structural Adhesives are designed to satisfy the demands of industry for large gap filling, high impact and shock resistance bonds. They conveniently dispense and cure with activators, UV light source or heat. See Structural Adhesive.
SAF-T-LOK® TPS PTFE Anaerobic Pipe Sealants cures on black iron, galvanized and stainless steel pipe as well as monel and on other inactive metals. TPS is NSF Certified and bears the highest classified pipe sealant rating from the UNDERWRITERS LABORATORY.
SAF-T-EZE® Pipe-Seal is compounded with PTFE to lubricate joint assembly. It is resistant to chemicals and can be used on pipes larger than 3/4" diameter to seal kerosene, LP gas, oil, water, weak caustic acids and low pressure steam. See TPS I-TPS and Pipe-Seal.
SAF-T-LOK® PFS (Polymeric Flange Sealants) replaces most conventional gaskets on metal surfaces. It cures in the absence of air and will not shrink, tear or crack and provides maximum face to face contact of mated parts. PFS Gasket provides an instant seal at low pressures and fully cures in 1 to 8 hours depending upon part configuration and clearance. No retorquing of flange bolts is required. See PFS.
RTV 732 Silicone Sealant
SAF-T-LOK® RTV 732 Silicone Sealants offer a high performance product designed for a broad variety of sealing and bonding requirements in original equipment manufacturing or for maintenance needs. See RTV 732 Silicone Sealant.
SAF-T-EZE® Anti-Seize is compounded from fine metallic particles and graphite in a heat resistant lubricant. This combination results in extreme pressure lubricating properties that prevent galling and cold welding, and at the same time resist water wash out or galvanic pitting and corrosion from road salt, acid rain or salt water. See Anti-Seize Compound.
SAF-T-EZE® offer a range of high performance greases: Extreme Pressure Bearing Lubricant, Extended Life Bearing Lubricant, High Temperature Bearing Lubricant, Di-Electric Silicone Grease and General Purpose Silicone Lubricant. See Lubricant.
Packaged in 16oz cans, SAF-T-EZE offer a range of high quality aerosol products for maintenance applications; Penetrating Oil, Belt Dressing, Gasket Remover, Dry Moly, Silicone Lubricants, Contact Cleaner and Gel Lubricant. See Maintenance.